GSM 3G 4G 5G Cellular Mobile Communication Tower 30m to 60m
We're professional manufacturer of all kinds of communications towers and steel poles, including:
1, Free Standing galvanized steel 3-legged lattice tower, made from steel tubes or/and angular plates.
2, Self-support 4-legged lattice tower made from angle steel plates or/and tubes.
3, Guyed wire towers, square or triangle guyed towers.
4, Mono poles
5, Artificial tree monopole camouflaged towers.
6, Camouflaged monopole towers with fiberglass grille shroud on top for hiding antennas.
7, All kinds of lighting towers and street light poles.
Self supporting tower usually is 3-leg of 4-leg tower, and its material is steel pipe or angle steel. As for the connection, tubular tower is connected by flange, and angle steel tower is connected by nuts and bolts.
Basic Procedures of Building A GSM Telecom Tower
1, Site geologival investigation or survey to clasify terrain category and confirm it meets tower erection requirements
2, Design tower body and foundations
3, Test and specify the tower body and foundation by professional design and calculation software
4, Specify the tower and foundation dimensions and specifications of materials.
5, Prepare lofting and shop drawing of tower sections
6, Manufacture tower members according to the drawings and specifications.
7, Dig holes for the tower foundations and make a cement underlayer on the bottom
8, Make steel cage frames and anchorages for foundations
9, Make wooden molds for constructing concrete foundations
10, Set up grounding net with steel plates or rods around foundations.
11, Pour concrete and construct bottom blocks and pedestals
12, Dry and watering concrete foundations
13, Test the impact strength and make sure it meets the design specifications.
14, Fix tower footings to foundation pedestals and other tower members
15, Assemble tower sections and antenna brackets, ladder, rest and work platforms, lightning rod, grounding plates etc.
16, Set grouding of tower body and foundations, make sure at least 2 feet of tower must be connected with the ground net, lightning rod must be connected with grounding net through at least 2 foundations.
17, Test the straightness or verticality of tower
18, Complete if all specifications are confirmed.
Specification of Mobile Communication Tower:
| Material | Tubular Steel, Angle steel plates, flat steel plate |
| Steel Type | Weldable low carbon structural steel |
| Steel Grade | GB Q235, Q345, BS 4360, ASTM A36 etc. |
| Yield Strength | Fy≥235MPa |
| Tensile Strength | Fu≥400MPa |
| Elongation | σ≥20% |
| Surface Finish | Hot dip galvanization |
| Galvanized layer | T≥65μm |
| Height | 20m to 100m, customized to requests |
| Design | 4 legs self-supporting or free standing lattice tower |
| Structure | 1 to 5 platforms, each platform comes with 4 to 6 brackets for mounting antennas or specified number of brackets for mounting antennas, microwaves, RRUs and other devices. |
| Supply mode | CKD(Complete Knocked Down), SKD(Semi-Knocked Down), DKD(Direct Knocked Down) |
| Fixing/Fastening | Bolts and nuts, connecting plates |
| Configuration | Foundations/anchoring bolts, tower sections, 1-5 platforms (optional), mounting brackets, ladder, anti-fall safety system, lightning rod, earthing plate etc. |
| Wind Load | 0.35-1.0kN/sqm |
| Lifespan | 20-50 years |
| Warranty | 5 years |
| Applications | GSM/3G/4G/5G/FM radio antennas, microwaves, telecom stations.
|
35m GSM Mobile Communication Tower with 2 work platforms
Applications of Steel Towers
1, GSM, 2G/4G/5G cellular Mobile communications antennas mounting and telecom signal transmission tower.
2, FM, AM, VHF radio transmission tower.
3, TV station tower
4, Electrical power transmission and distribution pylon
5, Millitary watch tower
6, Radar Microwave tower etc.
Product Tags:
|
|
GSM 3G 4G 5G Cellular Mobile Communication Tower 30m To 60m Images
|
