30m Galvanized Transmission Steel Tower Multiple Platforms Free Standing
Galvanized Steel Pole For Electricity Power Wires Transmission And Distribution
Transmission Steel Tower:
High mast steel poles and towers for lighting, communication and landscaping.
Artificial trees for landscaping and comouflaged communication antenna towers
Signage, billboard, LED display and traffic signal management poles and gantry frames.
Other steel structures etc.
Specifications
| Material |
Steel pipes, Angle steel plates, flat steel plates, bolts and nuts |
| Steel Type |
Weldable low carbon structural steel |
| Steel Grade |
GB Q235, Q345, BS 4360, ASTM A36 etc. |
| Yield Strength |
Fy≥235MPa |
| Tensile Strength |
Fu≥400MPa |
| Elongation |
σ≥20% |
| Surface Finish |
Hot dip galvanization |
| Galvanized layer |
T≥65μm |
| Height |
20m to 100m, customized to requests |
| Design |
4 legs self-supporting or free standing lattice tower |
| Structure |
Multiple platforms and brackets for mounting power cables or wires, customized to requests. |
| Supply mode |
CKD(Complete Knocked Down), SKD(Semi-Knocked Down), DKD(Direct Knocked Down) |
| Fixing/Fastening |
Bolts and nuts, connecting plates |
| Configuration |
Foundations/anchoring bolts, tower sections, 1-5 platforms (optional), mounting brackets, ladder, anti-fall safety system, lightning rod, earthing plate etc. |
| Wind Load |
0.35-1.0kN/sqm |
| Lifespan |
20-50 years |
| Warranty |
3 years |
| Applications |
GSM/3G/4G/5G/FM radio antennas, microwaves, telecom stations. |
SST: Self-supporting Steel Tower
Self-supporting steel tower is the most popular tower for communication or power transmission and distribution applications. It’s generally designed for 3 legs or 4 legs, composed of galvanized tubular steel pipes and angular steel plates by welding and fastening with bolts and nuts. With height of 35m to 100m, the steel lattice towers are widely used for mounting communication macrocell stations and power transmission or distribution wires or cables.
So the most popular 3 legged steel lattice tower is made from tubular pipes and angular steel plates. The steel pipes are made for tower legs, angular steel plates are made for bracings (support members) and flate steel plates for connectors. The steel pipes are welded with flanges at each end for connection. All the parts of tower are prefabricated in CKD (completel knocked down) steel members ready for installation. When you install the tower, just fix the steel pipes to foundations by bolts and nuts and then connect the angular steel plate bracings to the pipes via welded connecting plates with bolts and nuts. In CKD way of fabrication, the cost is lower and shipping cost is also much lower because you can ship more materials in a container or truck.
Product Tags:
|
|
30m Galvanized Transmission Steel Tower Multiple Platforms Free Standing Images
|
